Search result related to
A hole is of dimension

Notes

Cellonics Technology

MANAGEMENT AND ENTREPRENEURSHIP Unit-2

Ten Computer Tricks Every Geek Should Know-8

ME2155 COMPUTER AIDED DRAFTING AND MODELING LABORATORY

13 - Transformation

RV engineering college

I ching the book of change

THE KAMA SUTRA OF VATSYAYANA Part-41

Plastic Memory

CE2305 FOUNDATION ENGINEERING

Questions


The purpose of a boring operation in relation to a drilling operation is to
0 Answer

I n a mass production firm, measurements are carried out on 10000 pairs of shaft and hole. The mean diameters of the shaft and the hole are 37.53 mm and 37.59 mm, respectively. The corresponding standard deviations are 0.03 mm and 0.04 mm. The mean clearance and its standard deviation (both in mm), respectively, are
1 Answer

A tank open at the top with a water level of 1 m, as shown in the figure, has a hole at a height of 0.5 m. A free jet leaves horizontally from the smooth hole. The distance X (in m) where the jet strikes the floor is (Gate 2018 Mechanical engineering)
0 Answer

An n–type silicon sample is uniformly illuminated with light which generates 20 10 electron hole pairs per cm3 per second - GATE EC 2015
1 Answer

An electrochemical machining (ECM) is to be used to cut a through hole into a 12 mm thick aluminum plate. The hole has a rectangular cross-section, 10 mm × 30 mm. The ECM operation will be accomplished in 2 minutes, with efficiency of 90%. Assuming specific removal rate for aluminum as 3.44 × 10-2 mm3 /(A s), the current (in A) required is __________ (Gate 2018 Mechanical engineering).
0 Answer

A vertical well of 8000 ft is producing below bubble point pressure. Oil and water each is produced at the rate of 500 bbl/day. The indicated bottom hole pressure is 3000 psi. If the same gas to liquid ratio (GLR) is maintained, using the given figure, the new bottom hole pressure at 5000 ft is __________ psi. A vertical well of 8000 ft is producing below bubble point pressure. Oil and water each is produced at the rate of 500 bbl/day. The indicated bottom hole pressure is 3000 psi. If the same gas to liquid ratio (GLR) is maintained, the new bottom hole pressure at 5000 ft, using the given figure, is __________
0 Answer

Fill in the blanks. GATE- Chemical Engineering- 2013
1 Answer

An oil tank can be filled by pipe X in 5 hours and pipe Y in 4 hours, each pump working on its own. When the oil tank is full and the drainage hole is open, the oil is drained in 20 hours. If initially the tank was empty and someone started the two pumps together but left the drainage hole open, how many hours will it take for the tank to be filled? (Assume that the rate of drainage is independent of the Head)
0 Answer

I n a p-n junction diode at equilibrium, which one of the following statements is NOT TRUE?
1 Answer

List few attributes of time and content dimension of information quality?
1 Answer

What is dimension reduction in machine learning?
3 Answer

The dimension of the vector space of 7 × 7 real symmetric matrices with trace zero and the sum of the off-diagonal elements zero is
1 Answer

A carpenter bought a rectangular white board of dimension 4 feet x 3 feet, which cost him Rs 12 per square feet.
1 Answer

What is pin hole camera ?
1 Answer

Identify any one occasion/ instance where cold war between the two superpowers became a simple struggle for power by ignoring the ideological dimension.
1 Answer

The operation of enlarging of a hole is called what in MEE?
1 Answer

Assume that multiplying a matrix G1 of dimension p × q with another matrix G2 of dimension q × r requires pqr scalar multiplications. Computing the product of n matrices G1G2G3...Gn can be done by parenthesizing in different ways. Define Gi Gi+1 as an explicitly computed pair for a given paranthesization if they are directly multiplied. For example, in the matrix multiplication chain G1G2G3G4G5G6 using parenthesization (G1(G2G3))(G4(G5G6)), G2G3 and G5G6 are the only explicitly computed pairs.
0 Answer

What is dimension reduction in Machine Learning?
1 Answer

The dimension of the null space of the following matrix is GATE-Instrumentational Engineering-2013
1 Answer

Which of the following can have positive or negative charge?
1 Answer
Speaks

You can do any of the following

Ask a question about this
Write a not about this