See Our team
Wondering how we keep quality?
Got unsolved questions? Ask Questions
Engineering GATE CBSE NCERT Psychology English Computer Constitution Astrology Yoga Economics Physics Biology Electronics Microprocessor Career Interview Anatomy Botany
A stone with mass of 0.1kg is catapulted as shown in the figure. -gate-mechanical-20111 AnswerA mass of 1kg is attached to two identical springs each with stiffness k = 20kN/m as shown in the figure. -gate-mechanical-20111 AnswerA double – parallelogram mechanism is shown in the figure. -gate-mechanical-20111 AnswerA 1 kg block is resting on a surface with coefficient of friction µ = 0.1. -gate-mechanical-20111 AnswerA simply supported beam PQ is loaded by a moment of 1kN-m -gate-mechanical-20111 AnswerFor the four-bar linkage shown in the figure, the angular velocity of link AB is 1 rad/s. the length of link CD is 1.5 times the length of link AB. -gate-mechanical-20111 AnswerTwo beams are connected by a linear spring as shown in the following figure. For a load P as shown in the figure, the percentage of the applied load P carried by the spring is _______________. - gate civil 2017 1 AnswerA force P is applied at a distance x from the end of the beam as shown in the figure. What would be the value of x so that the displacement at ‘A’ is equal to zero? (-Gate mechanical engineering 2014)1 AnswerA solid sphere of radius r1 = 20 mm is placed concentrically inside a hollow sphere of radius r2 = 30 mm as shown in the figure. (Gate mechanical engineering 2014)1 AnswerThe diameter of a recessed ring was measured by using two spherical balls of diameter d2 =60 mm and d1=40 mm as shown in the figure. (-Gate mechanical engineering 2014)1 AnswerFor formation of collapse mechanism in the following figure, the minimum value of Pu is cMp/L. Mp and 3Mp denote the plastic moment capacities of beam sections as shown in this figure. The value of c is _______________. gate civil 2017 1 AnswerThe damping ratio of a single degree of freedom spring-mass-damper system with mass of 1 kg, stiffness 100 N/m and viscous damping coefficient of 25 N.s/m is _____.1 Answer what will be the height attained by the stone and how much time will it take to reach there? - Physics Cbse class 11 1 AnswerA cylindrical blind riser with diameter d and height h, is placed on the top of the mold cavity of a closed type sand mold as shown in the figure. If the riser is of constant volume, then the rate of solidification in the riser is the least when the 1 AnswerThe channel resistance of an N-channel JFET shown in the figure below is 600 Ω -gate-ece-20111 AnswerA drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of friction between drum and shoe is 0.2. The dimensions shown in the figure are in mm. The braking torque (in N.m) for the brake shoe is _____. (Ga1 AnswerAn annular disc has a mass m, inner radius R and outer radius 2R. The disc rolls on a flat surface without slipping. If the velocity of the centre of mass is v, the kinetic energy of the disc is: (-Gate mechanical 2014)1 AnswerA mass m1 of 100 kg travelling with a uniform velocity of 5 m/s along a line collides with a stationary mass m2 of 1000 kg. After the collision, both the masses travel together with the same velocity. The coefficient of restitution is:1 AnswerA ray of light LM is incident on a mirror as shown in the figure. The angle of incidence for this ray is the angle between it and the line joining two other points in the figure. Name these two points. -2009 CBSE Physic class 101 AnswerThe channel resistance of an N-channel JFET shown in the figure below is 600 Ω -gate-ece-20111 Answer