See Our team
Wondering how we keep quality?
Got unsolved questions? Ask Questions
Engineering GATE CBSE NCERT Psychology English Computer Constitution Astrology Yoga Economics Physics Biology Electronics Microprocessor Career Interview Anatomy Botany
Saturated steam at 100°C condenses on the outside of a tube. Cold fluid enters the tube at 20° C and exists at 50°C. The value of the Log Mean Temperature Difference (LMTD) is ________°C.1 AnswerIn a steam condenser the inlet and exit temperature of the odd stream are 20 and the steam condenses on outside surface of the tube.1 AnswerIn a condenser of a power plant, the steam condenses at a temperature of 0 60 C . -gate-mechanical-20111 AnswerL og mean temperature difference (LMTD) correction factor (F) is applicable to (A) Spiral tube heat exchanger (B) Steam jacketed kettle (C) Plate heat exchanger (D) Evaporator tubes (GATE-Agricultural-Engineering-2018)0 AnswerU nder isothermal condition, a vertical tube of length L = 100 m contains a gas of molecular weight equal to 60. The pressure and temperature at the top of the tube are 100 kPa and 25 oC respectively. Consider the universal gas constant and acceleration due to gravity as 8.314 J mol-1 K-1 and 9.81 m s-2 respectively. If the gas is ideal, the pressure (in kPa) at the bottom of the tube will be ____________ (rounded off to third decimal place).0 AnswerS egmental baffles in a 2-4 shell and tube heat exchanger0 AnswerSegmental baffles in a 2-4 shell and tube heat exchanger (GATE-Chemical-Engg-2018)0 AnswerA student is performing the experiment of Resonance Column. The diameter of the column tube is 4 cm. The frequency of the tuning fork is 512 Hz. The air temperature is 38ºC in which the speed of sound is 336 m/s. The zero of the meter scale coincides with the top end of the Resonance Column tube. When the first resonance occurs, the reading of the water level in the column is - jee main 20123 AnswerA pitot-static tube is used to measure air velocity in a duct by neglecting losses. The density of air is 1.2 kg/m3. If the difference between the total and static pressures is 1 kPa, the velocity of air at the measuring location, in m/s, is _______.0 AnswerA shock wave is moving into still air in a shock tube. Which one of the following happens to the air? (GATE-Aerospace-Engineering-2018)0 AnswerA hot liquid is to be cooled in a 1-1 shell and tube heat exchanger from 80 oC to 50 oC. Cooling water enters the tube side at 30 oC, and exits at 45 oC. The properties of the liquids are constant. Also, the overall heat transfer coefficient is same for counter-current and cocurrent modes. The percentage saving in heat transfer area for counter-current option with respect to the area of co-current option is __________ (rounded off to third decimal place).0 AnswerA fully penetrating tube well in a 30 m deep confined aquifer with hydraulic conductivity of 4×10^-4m s^-1has 50 L s^-1 discharge. The drawdown and radius of influence are 5 m and 250 m, respectively. Diameter of the tube well in mm is ____________ 1 AnswerExplain the events upto double fertilisation after the pollen tube enters one of the synergids in an ovule of an angiosperm. -cbse-Biology-class-12 1 AnswerHow to download You Tube Videos?1 AnswerA single strength fruit juice is concentrated from 6% total solids (TS) to 24% by ultrafiltration. The feed stream has a flow rate of 12 kg min^-1. The ultrafiltration membrane tube has an inside diameter of 80 mm and the pressure difference applied across the membrane is 2 MPa. If the permeability constant is 4×10-5 kg water m-² kPa^-1 s^-1, the length of the membrane tube is _________m. (GATE-Agricultural-Engineering-2018)0 AnswerW ater is flowing in two different tubes of diameters D and 2D, with the same velocity. The ratio of laminar friction factors for the larger diameter tube to the smaller diameter tube is1 AnswerWhat is meant by sensitiveness of bubble tube? Describe how you would determine in the field the sensitiveness of a level tube attached to a dumpy level (Dec11, June-July11)?1 AnswerA ball is dropped from rest from a height of 1 m in a frictionless tube as shown in the figure. If the tube profile is approximated by two straight lines (ignoring the curved portion), the total distance travelled (in m) by the ball is __________ (correct to two decimal places). 1 AnswerMilk enters into the heating section of a high temperature short time (HTST) pasteurizati on plant at a temperature of 45ºC and leaves at 72 ºC. Hot water at temperature of 95 ºC enters counter - currently into the heat exchanger 1 AnswerFigure shows the schematic for the measurement of velocity of air -gate-mechanical-20111 Answer
VTU SYLLABUS 2010 (Civil) FLUID MECHANICS [10CV35] EngineeringCE2202 MECHANICS OF FLUIDS CE 2023 ELECTRONIC SURVEYINGCE2253 APPLIED HYDRAULIC ENGINEERINGCE 2402 ESTIMATION AND QUANTITY SURVEYINGCE2258 HYDRAULIC ENGINEERING LABDiamond chipFuzzy based washing machine non visible imaging20 - Beyond Illusion
Loading More post