See Our team
Wondering how we keep quality?
Got unsolved questions? Ask Questions
Engineering GATE CBSE NCERT Psychology English Computer Constitution Astrology Yoga Economics Physics Biology Electronics Microprocessor Career Interview Anatomy Botany
In the Tyler standard screen scale series , when the mesh number increases from 3 mesh to 10 mesh, then, GATE- Chemical Engineering- 20131 AnswerFill in the blanks. GATE- Chemical Engineering- 20131 AnswerWhat is mesh topology?1 AnswerWhich laws are used to solve using mesh analysis1 AnswerA set of standard stainless steel pipes, each of internal diameter 26.65 mm and 6000 mm length, is used to make a plug flow reactor by joining them in series to carry out degradation of polyethylene. Seven such pipes are required to obtain a conversion of 66% at 450 K. The minimum number of standard 8000 mm long pipes of the same internal diameter to be procured for obtaining at least 66% conversion under the same reaction conditions is ___________.0 AnswerClassify the objects or materials given below as opaque, transparent or translucent and luminous or non-luminous: (Science-Ncert class 6)1 AnswerWhich one of the following can give information about the corrosion rate? GATE- Metallurgical Engineering- 20131 AnswerFind the sum to n terms of the series 10 + 84 + 734 + ... GATE-Instrumentational-Engineering-20131 AnswerFill in the blanks. GATE- Chemical Engineering- 20131 AnswerFill in the blanks. GATE- Chemical Engineering- 20131 AnswerA student obtains a blurred image of a distant object on a screen using a convex lens. To obtain a distinct image on the screen he should move the lens. CBSE- class10- Chemistry 20171 AnswerIn the feedback network shown below, if the feedback factor k is increased, then the GATE-Instrumentational-Engineering-20131 AnswerA student focuses the image of a candle flame, placed at about 2 m from a convex lens of focal length 10 cm, on a screen. After that he moves gradually the flame towards the lens and each time focuses its image on the screen. CBSE- cl1 AnswerIn a work sampling study of a worker, the information available are as follows: total time of study: 30 hour, number of items produced: 320, total number of observations: 1000, number of observations when worker is found working: 850 and average performance rating: 105%. Company policy is to give allowance of 10% of total time on the job. The standard time (in minute per item, up to one decimal place) for manufacturing the item is ______0 AnswerRephrase the sentence(GMAT) 1 AnswerDraw to scale 1 : 1, the standard profile of a B.S.W. Thread, taking enlarged pitch as 50 mm. Give standard dimensions. (ENGG-GRAPHICS-CBSE-12-2018)0 Answer In each of the following questions, a number/letter series is given with one term missing. Choose the correct alternative that will continue the same pattern and replace the question mark in the given series.(NIFT)1 AnswerAs 𝑥 varies from −1 to +3, which one of the following describes the behaviour of the function 𝑓(𝑥) = 𝑥3 – 3𝑥2 + 1? Gate-20161 AnswerStandard error is (GATE-Biotechnology-2018)0 AnswerFill in the blanks. GATE- Metallurgical Engineering- 20131 Answer
Mesh RadioCG and Visualisation Lab(10CSL67) Vtu prg-10EE2155 ELECTRICAL CIRCUIT LABORATORY GATE- Chemical Engineering- 2013Nokia MorphEE2151 CIRCUIT THEORY GATE Electronics and Communication Engineering Question Paper 2013 downloadGATE Mechanical Engineering Question Paper 2013 download MOTESGATE Computer Science Engineering / Information Technology Question Paper 2013 download
Loading More post