See Our team

Wondering how we keep quality?

Got unsolved questions?

Ask Questions

GATE
GMAT
CBSE
NCERT
Career
Interview
Railway
UPSC
NID
NIFT-UG
NIFT-PG
PHP
AJAX
JavaScript
Node Js
Shell Script
Research

New updates

Searching for :Shell scriptDate:2019-06-26 17:15:50Done by:Anonymous user(Visitor)Searching for :Node JsDate:2019-06-26 17:15:49Done by:Anonymous user(Visitor)

Searching for :Shell scriptDate:2019-06-26 17:11:17Done by:Anonymous user(Visitor)

Career 2.0

You might be intrested on below oppertunities Show me All

Posted By:Eduladder

Posted By:Eduladder

### Similar Questions

**Milk enters into the heating section of a high temperature short time (HTST) pasteurizati on plant at a temperature of 45ºC and leaves at 72 ºC. Hot water at temperature of 95 ºC enters counter - currently into the heat exchanger**

1 Answer

**In a condenser of a power plant, the steam condenses at a temperature of 0 60 C . -gate-mechanical-2011**

1 Answer

**A mbient air at 30◦C dry bulb temperature and 80% relative humidity was heated to a dry bulb temperature of 80◦C in a heat exchanger by indirect heating. The amount of moisture gain (g kg-1 dry air) during the process would be _______.**

0 Answer

**Hot water at 95 C is used in a plate heat exchanger for heating 2 kg s^-1 fruit juice from 45C to 75C. Specific heat capacity of fruit juice is 3.7 kJ kg^-1 K ^-1. Final temperature of the hot water is 70C. Overall heat transfer coefficient is 1122 W**

1 Answer

**S team in the condenser of a thermal power plant is to be condensed at a temperature of 30C with cooling water which enters the tubes of the condenser at 14C and exits at 22C. The total surface area of the tubes is 50 m2, and the overall heat transfer coefficient is 2000 W/m2 K. The heat transfer (in MW) to the condenser is ______ (correct to two decimal places).**

1 Answer

**T he humidity of air at a dry-bulb temperature of 65 oC is 0.025 kg water/kg dry air. The latent heat of vaporization of water at 0 oC is 2500 kJ/kg. The psychrometric ratio of air is 0.95 kJ (kg dry air)-1 K-1. Considering 0 oC as reference temperature, the enthalpy of air (in kJ/kg) at its adiabatic saturation temperature of 35 oC is ___________ (rounded off to two decimal places).**

0 Answer

**A hot liquid is to be cooled in a 1-1 shell and tube heat exchanger from 80 oC to 50 oC. Cooling water enters the tube side at 30 oC, and exits at 45 oC. The properties of the liquids are constant. Also, the overall heat transfer coefficient is same for counter-current and cocurrent modes. The percentage saving in heat transfer area for counter-current option with respect to the area of co-current option is __________ (rounded off to third decimal place).**

0 Answer

**Consider Guwahati (G) and Delhi (D) whose temperatures can be classified as high (H), medium (M) and low (L). Let P(HG ) denote the probability that Guwahati has high temperature. Similarly, P(MG ) and P(LG ) denotes the probability of Guwahati having medium and low temperatures respectively. Similarly, we use P(HD), P(MD) and P(LD) for Delhi.**

0 Answer

**An air-conditioner maintains the room temperature at 27 oC while the outside temperature is 47 oC. The heat conducted through the walls of the room from outside to inside due to temperature difference is 7000 W. The minimum work done by the compressor of the air-conditioner per unit time is ________ W**

1 Answer

**Metals approach super conductivity condition**

0 Answer

**An ideal Otto cycle (O) and an ideal diesel cycle (D) have the same maximum temperature and reject equal amount of heat. Also, the working fluid enters at the same state before compression. One of the following statements always true about their efficiencies (𝜂) is**

1 Answer

**L og mean temperature difference (LMTD) correction factor (F) is applicable to (A) Spiral tube heat exchanger (B) Steam jacketed kettle (C) Plate heat exchanger (D) Evaporator tubes (GATE-Agricultural-Engineering-2018)**

0 Answer

**A ir enters into an engine cylinder at a pressure of 100 kPa and temperature of 300 K in the suction stroke of an ideal Otto cycle. The cylinder clearance volume is 600 cm^3 and compression ratio is 8:1. The expansion stroke of the cycle is polytropic in nature. The pressure at the beginning of the expansion stroke is 10 MPa and the temperature at the end of the expansion stroke is 1800 K. The polytropic exponent of the expansion stroke is ________. (GATE-Agricultural-Engineering-2018)**

0 Answer

**A n insulated storage tank contains 1000 kg liquid of specific heat 10 kJ kg-1 K-1. The liquid is heated by saturated steam, condensing in a helical coil at a temperature of 180 oC. The heat transfer area of the coil is 0.1 m2. If the overall heat transfer coefficient is constant at 1000 W m-2 K-1, then the time (in hours) required to raise the temperature of the liquid in the tank from 20 oC to 80 oC is ____________ (rounded off to second decimal place).**

0 Answer

**The amount of heat required to raise the temperature of 1 kg of water through 1° C is called**

0 Answer

**T he rate of heat transfer from a metal plate is 1000 W m-2. The surface temperature of the plate is 120◦C and ambient temperature is 20◦C. The convective heat transfer coefficient (W m-2 ◦C-1) using the Newton’s law of cooling will be _______.**

0 Answer

**Saturated steam at 100°C condenses on the outside of a tube. Cold fluid enters the tube at 20° C and exists at 50°C. The value of the Log Mean Temperature Difference (LMTD) is ________°C.**

1 Answer

**In a counter-flow heat exchanger, water is heated at the rate of 1.5kg/s from 40°C to 80°C by an oil entering at 120°C and leaving at 60°C. The specific heats of water and oil are 4.2kJ/kg/K and 2kJ/kg.K respectively. The overall heat transfer coefficient is 400 W/m2 .K. The required heat transfer surface area (in m2) is**

1 Answer

**In a counter-flow heat exchanger, water is heated at the rate of 1.5kg/s from 40°C to 80°C by an oil entering at 120°C and leaving at 60°C. The specific heats of water and oil are 4.2kJ/kg/K and 2kJ/kg.K respectively. The overall heat transfer coefficient is 400 W/m2 .K. The required heat transfer surface area (in m2) is**

1 Answer

**Plot a graph showing the variation of specific heat of water with temperature. Physics Cbse class 11 2016**

1 Answer

## The Switch is switched off once the temperature falls below 18 and then it is turned on when the temperature is more than 21. When the temperature is more than 21. Identify the Equivalance values which belong to the same class.

a) 12,16,22b) 24,27,17

c) 22,23,24

Asked On2018-11-12 13:15:04 by:softwareTester

Taged users:

Likes:

Be first to like this question

Dislikes:

Be first to dislike this question

Talk about this Delete Like Dislike

Download question setAnswersAnswer isc) 22,23,24

## The Switch is switched off once the temperature falls below 18 and then it is turned on when the temperature is more than 21. When the temperature is more than 21. Identify the Equivalance values which belong to the same class.

a) 12,16,22b) 24,27,17

c) 22,23,24

Likes:

Be first to like this answer

Dislikes:

Be first to dislike this answer

Talk about this Delete Like Dislike

## You might like this video:Temprature and heat -Physics

Watch more here

## Watch more videos from this user Here

Lets together make the web is a better placeWe made eduladder by keeping the ideology of building a supermarket of all the educational material available under one roof. We are doing it with the help of individual contributors like you, interns and employees. So the resources you are looking for can be easily available and accessible also with the freedom of remix reuse and reshare our content under the terms of creative commons license with attribution required close.

You can also contribute to our vision of "Helping student to pass any exams"with these.Answer a question:You can answer the questions not yet answered in eduladder.How to answer a questionCareer:Work or do your internship with us.Work with usCreate a video:You can teach anything and everything each video should be less than five minutes should cover the idea less than five min.How to upload a video on eduladder