See Our team
Wondering how we keep quality?
Got unsolved questions? Ask Questions
Engineering GATE CBSE NCERT Psychology English Computer Constitution Astrology Yoga Economics Physics Biology Electronics Microprocessor Career Interview Anatomy Botany
Consider the parallel combination of two LTI systems shown in the figure.1 AnswerFill in the blanks GATE-Instrumentation-Engineering-20141 AnswerTwo beams are connected by a linear spring as shown in the following figure. For a load P as shown in the figure, the percentage of the applied load P carried by the spring is _______________. - gate civil 2017 1 AnswerTwo metallic wires A and B of the same material are connected in parallel. Wire A has length l and radius r, wire B has a length 2l and radius 2r. Compute the ratio of the total resistance of parallel combination and the resistance of wire A. -CBSE p1 AnswerA drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of friction between drum and shoe is 0.2. The dimensions shown in the figure are in mm. The braking torque (in N.m) for the brake shoe is _____. (Ga1 AnswerA ray of light LM is incident on a mirror as shown in the figure. The angle of incidence for this ray is the angle between it and the line joining two other points in the figure. Name these two points. -2009 CBSE Physic class 101 AnswerIn the given figure, XY and X’Y’ are two parallel tangents to a circle with centre O and another tangents AB with point of contact C, is intersecting XY at A and X’Y’ at B. Prove that ∠AOB = 90°. Mathematics CBSE class 10 20171 AnswerFor formation of collapse mechanism in the following figure, the minimum value of Pu is cMp/L. Mp and 3Mp denote the plastic moment capacities of beam sections as shown in this figure. The value of c is _______________. gate civil 2017 1 AnswerA lead compensator network includes a parallel combination of R and C in the feed-forward path. -GATE EC 20151 AnswerWhich of the following can be used as a resource in parallel computing? 1 AnswerConsider the D-Latch shown in the figure, which is transparent when its clock input CK is high and has zero propagation delay. In the figure, the clock signal CLK1 has a 50% duty cycle and CLK2 is a one-fifth period delayed version of CLK1. The duty cycle at the output latch in percentage is ___________.1 AnswerThe switch in the circuit, shown in the figure, was open for a long time and is closed at t = 0.1 AnswerFor the circuit with ideal diodes shown in the figure, the shape of the output vout for the -GATE EC 20151 AnswerThe circuit shown in the figure has an ideal opamp. The oscillation frequency and the condition to sustain the oscillations, respectively, are -GATE EC 20151 AnswerConsidering the transformer to be ideal, the transmission parameter A of the 2– port network shown in the figure below is GATE-Instrumentational-Engineering-20131 AnswerName three liquids, which when tested in the manner shown in figure, may cause the magnetic needle to deflect. cbse-class8-physics-20151 AnswerThe uniaxial interference figure of a mineral given below shows the changes in the position of color bands when a mica plate is inserted in the accessory slot of the microscope as shown. The changes in the interference figure are due to: (-Gate geolo1 AnswerThe bulb does not glow in the setup shown in figure. List the possible reasons. Explain your answer. cbse-class8-physics-20151 AnswerThe graph shown below 8 edges with distinct integer edge weights. -gate-cse-20151 AnswerIn the network shown in the figure, all resistors are identical with R 300 ohm . The resistance Rab of the network is________ -GATE EC 20151 Answer