Never Miss an Update
Subscribe to eduladder news letter Today
Like to work with us?
The governing equation for the static transverse deflection of a beam under an uniformly distributed load, according to Euler-Bernoulli (engineering) beam theory, is a GATE-Aerospace Engineering-Question-20121 AnswerA fixed end beam is subjected to a load, W at 1/3rd span from the left support as shown in the figure. The collapse load of the beam is: - gate civil 2017 1 AnswerA simply supported beam AB of span, L = 24 m is subjected to two wheel loads acting at a distance, d = 5 m apart as shown in the figure below. Each wheel transmits a load, P = 3 kN and may occupy any position along the beam. If the beam is an I-section having section modulus, S = 16.2 cm 3 , the maximum bending stress (in GPa) due to the wheel loads is _______________________. - gate civil 2017 1 AnswerWhat is the difference between uniformly distributed and uniformly varying loads and Moments.1 AnswerThe ideal static pressure coefficient of a diffuser with an area ratio of 2.0 is GATE-Aerospace Engineering-Question-20121 AnswerRoad roughness is measured using -Civil Engineering-gate-20121 AnswerFill in the blanks. GATE- Civil Engineering- 20131 Answerwhere will be the reinforcement of slab placed when there is an inverted beam and the bottom of the beam and slab are at same level ?1 AnswerThe real root of the equation 5x − 2cosx −1 = 0 (up to two decimal accuracy) is ____. (Gate mechanical engineering 2014)1 AnswerA force P is applied at a distance x from the end of the beam as shown in the figure. What would be the value of x so that the displacement at ‘A’ is equal to zero? (-Gate mechanical engineering 2014)1 AnswerA simply supported beam PQ is loaded by a moment of 1kN-m -gate-mechanical-20111 AnswerThe soil erodibility factor needs to be determined for use in the universal soil loss equation GATE-Agricultural Engineering-Question-20121 AnswerAn aircraft has a steady rate of climb of 300 m/s at sea level and 150 m/s at 2500 m altitude. GATE-Aerospace Engineering-Question-20121 AnswerThe value of k for which the system of equations x y kz x ky z + 2 1; 2 8 3 += ++= has no solution is GATE-Aerospace Engineering-Question-20121 AnswerThe process utilizing mainly thermal energy for removing material is: (Gate mechanical engineering 2014)1 AnswerBernoulli’s equation is valid under steady state GATE-Aerospace Engineering-Question-20121 AnswerThe back sight of 1.258 m was observed for the bench mark (BM) at reduced level (RL) of 48 m. The corresponding fore sight on the staff held vertically inverted to the underside of a bridge beam is 4.645 m. The RL at the underside of the bridge beam 1 AnswerChoose the most appropriate alternative from the options given below to complete the following sentence: GATE-Aerospace Engineering-Question-20121 AnswerChoose the most appropriate alternative from the options given below to complete the following sentence: GATE-Aerospace Engineering-Question-20121 AnswerTwo points (4, p) and (0, q) lie on a straight line having a slope of 3/4. The value of (p – q) is GATE-Aerospace Engineering-Question-20121 Answer
VTU SYLLABUS 2010 STRENGTH OF MATERIALS (COMMON TO CV/TR/EV/CTM) [10CV33] Engineering.CE2201 MECHANICS OF SOLIDSGATE-Aerospace Engineering-Question paper-2012CE 2041 BRIDGE STRUCTURES VTU SYLLABUS 2010 (Civil) FLUID MECHANICS [10CV35] Engineering10me34 Mechanics of materialsCE2202 MECHANICS OF FLUIDS CE2252 STRENGTH OF MATERIALSGATE- Aerospace Engineering- 201310CV43