New updates

Searching for :EngineeringDate:2019-03-20 16:06:03Done by:Anonymous user(Visitor)Updated ProfileDate:2019-03-20 15:59:09Done by:Trunkse5

Searching for :He is _ honest boy in the classDate:2019-03-20 15:47:10Done by:Anonymous user(Visitor)

Never Miss an Update

##### Subscribe to eduladder news letter Today

##### Like to work with us?

### Similar Questions

**Moist air is treated as an ideal gas mixture of water vapor and dry air (molecular weight of air = 28.84 and molecular weight of water = 18). At a location, the total pressure is 100 kPa, the temperature is 30°C and the relative humidity is 55%. Given that the saturation pressure of water at 30°C is 4246 Pa, the mass of water vapor per kg of dry air is _____________ grams.**

1 Answer

**Moist air is treated as an ideal gas mixture of water vapor and dry air (molecular weight of air = 28.84 and molecular weight of water = 18). At a location, the total pressure is 100 kPa, the temperature is 30°C and the relative humidity is 55%. Given that the saturation pressure of water at 30°C is 4246 Pa, the mass of water vapor per kg of dry air is _____________ grams.**

1 Answer

**Moist air is treated as an ideal gas mixture of water vapor and dry air (molecular weight of air = 28.84 and molecular weight of water = 18). At a location, the total pressure is 100 kPa, the temperature is 30°C and the relative humidity is 55%. Given that the saturation pressure of water at 30°C is 4246 Pa, the mass of water vapor per kg of dry air is _____________ grams.**

1 Answer

1 Answer

**Moist air is treated as an ideal gas mixture of water vapor and dry air (molecular weight of air = 28.84 and molecular weight of water = 18). At a location, the total pressure is 100 kPa, the temperature is 30°C and the relative humidity is 55%. Given that the saturation pressure of water at 30°C is 4246 Pa, the mass of water vapor per kg of dry air is _____________ grams**

1 Answer

**Moist air is treated as an ideal gas mixture of water vapor and dry air (molecular weight of air = 28.84 and molecular weight of water = 18). At a location, the total pressure is 100 kPa, the temperature is 30°C and the relative humidity is 55%. Given that the saturation pressure of water at 30°C is 4246 Pa, the mass of water vapor per kg of dry air is _____________ grams**

1 Answer

**An air – water vapour mixture is at 35C and normal atmospheric pressure with absolute humidity of 0.02 kg water vapour kg^-1 dry air. Its humid volume in m^3kg^-1 dry air is _________ Gate-Agricultural-2016**

1 Answer

**When we press the bulb of a dropper with its nozzle kept in water, air in the dropper is seen to escape in the form of bubbles. Once we release the pressure on the bulb, water gets filled in the dropper. The rise of water in the dropper is due to . cbse-class8-physics-2015**

1 Answer

**Vapour pressure of water at 20ºC is 17.5 mm Hg. Calculate the vapour pressure of water at 20ºC when 15 g of glucose (Molar mass = 180 g mol –1 ) is dissolved in 150 g of water. CBSE- Class12- Chemistry 2015**

1 Answer

**The pressure that does not have any measurable influence on the void ratio or shearing resistance of the soil mass is. GATE- Agricultural Engineering- 2013**

2 Answer

**The concentration of Sulfur Dioxide (SO2) in ambient atmosphere was measured as 30 g/m3 . Under the same conditions, the above SO2 concentration expressed in ppm is _______________. - gate civil 2017**

1 Answer

**If ν is the kinematic viscosity of air – water vapour mixture and DAR is the mass diffusivity of water vapour in air then the ratio ν/DAB is known as GATE-Agricultural Engineering-Question-2012**

1 Answer

**Water (density =1000 kg/m3) at ambient temperature flows through a horizontal pipe of uniform cross section at the rate of 1 kg/s. If the pressure drop across the pipe is 100 kPa, the minimum power required to pump the water across the pipe, in watts, is _______**

1 Answer

**The set of materials required in the experiment**

1 Answer

**A rocket motor has combustion chamber temperature of 2600 K and the products have molecular weight of 25 g/mol and ratio of specific heats 1.2. GATE-Aerospace Engineering-Question-2012**

1 Answer

**Enzyme-linked immunosorbent assay (ELISA) is used for GATE-Biotechnology-2017**

1 Answer

**Fill in the blanks. GATE- Chemical Engineering- 2013**

2 Answer

**Which one of the following can be estimated from SP log against a saline-water saturated sandstone formation encountered in a well? GATE-Geology and Geophysics-Question-2012**

1 Answer

**A solution containing 15 g urea (molar mass = 60 g mol –1 ) per litre of solution in water has the same osmotic pressure (isotonic) as a solution of glucose (molar mass = 190 g mol –1 ) in water. Calculate the mass of glucose present in one litre of its solution. CBSE- Class12- Chemistry 2014**

1 Answer

**A solution containing 15 g urea (molar mass = 60 g mol –1 ) per litre of solution in water has the same osmotic pressure (isotonic) as a solution of glucose (molar mass = 190 g mol –1 ) in water. Calculate the mass of glucose present in one litre of its solution. CBSE- Class12- Chemistry 2014**

1 Answer

### Notes

**CE2028 GROUND WATER ENGINEERING**

**Rain**

**CE 2031 WATER RESOURCES ENGINEERING**

**Zen Tarot card Going with the flow**

**CE2029 MANAGEMENT OF IRRIGATION SYSTEMS**

**CE2304 ENVIRONMENTAL ENGINEERING I**

**Moletronics- an invisible technology**

**Zen Tarot card 8 of Water: Letting Go**

**VTU SYLLABUS 2010 (Civil) FLUID MECHANICS [10CV35] Engineering**

**CE2356 ENVIRONMENTAL ENGINEERING LABORATORY**

## View question

## Given the atomic weight of Fe is 56 and that of C is 12, the weight percentage of carbon in cementite (Fe3C) is ________

Asked by:Oshal-Borkar

Taged users:

deepuckrajmetaphormetadatasatyashiromanimilan-ransinghmilanyoyoyogmailcomaksingh1818Rakesh-RakhiShikhilRajivNikhil-bharadwajAbdul-Wajidedu-FreakarunwebberMazenratikaRaju-bhaiAsgar-AliAditya-Kashyapneenu2PerumalSPurnimasameekshyasoumyaADI2017thegdxpsonika29AshishGarima-Singh

Likes:

Oshal-Borkar

Dislikes:

Be first to dislike this question

## Comments

## Type your comment here