View note:CE2308-SOIL-MECHANICS-LABORATORY-



Questions of this subject!.

QuestionLikes!Dislikes!Answers!
1)What is vocabulary test maker?

001
2)Write a note on effect of temperature on soil

001
3)What is the algebraic difference between the minimum limit and the basic size called?

001
4)Define the term compression ratio.

001
5)What are the limits of the text field size?

101
6)There is a limit to the size of dendrimer segments because of?

001
7)D etermine the correctness (or otherwise) of the following Assertion [A] and the Reason [R] Assertion [A]: For a material exhibiting Coble creep, a reduction in grain size results in a significant increase in creep rate Reason [R]: Grain boundaries act as a barrier to motion of dislocations

001
8)T aylor’s tool life equation is used to estimate the life of a batch of identical HSS twist drills by drilling through holes at constant feed in 20 mm thick mild steel plates. In test 1, a drill lasted 300 holes at 150 rpm while in test 2, another drill lasted 200 holes at 300 rpm. The maximum number of holes that can be made by another drill from the above batch at 200 rpm is ______ (correct to two decimal places).

001
9)T here is a change in the values of the bulk modulus and density across the Gutenberg discontinuity (from mantle to outer core). Which one of the following statements is CORRECT?

001
10)A t a shear rate of 10 s-1, the apparent viscosity of a non-Newtonian liquid was found to be 1 Pa s. At a shear rate of 100 s-1, the apparent viscosity of the same liquid was found to be 0.5 Pa s. If the liquid follows power law behavior, the apparent viscosity (in Pa s) at a shear stress of 10 N m-2 is _____________ (rounded off to two decimal place).

000
11)What are the applications of penetration test?

001